O2
This detector is a personal safety device that warns when hazardous or dangerous gas exceeds factory set alarm setpoints. It is your responsibility to respond properly to the alarm.
SKU CODE : TP-4053
| Detector Model | Detection Range | Resolution | Accuracy | Low Alarm | High Alarm |
| Oxygen | o~30%VOL | 0.10% | ±3% | 19.5%VOL | 23.5%VOL |
To turn the unit on, press and hold the ‘ON/OFF’ button until the gas type and version number appears on the display.
The detector will power up and begin a warm up routine which includes tests of the display, audible, visual, and vibrating alarms. Following this brief warm up, the detector enters the gas readings mode signified by the gas concentration and gas identifier icon.
To tuen off the detector, simply press and hold ‘ON/OFF’ for five seconds (five beeps).
When the battery voltage is low, the instrument’s display on the display of the battery symbol blank space, prompted to change the battery. To change the battery, simply insert the supplied Phillips screwdriver into the battery door, rotate a few turncounter clockwise, and remove battery. Install new battery, being sure to observe proper polarity. Replace the battery door and turn clockwise with Phillips screwdriver. Warning: Replace battery only in non-hazaidous locaion. Substitution of components may impair intrinsic safety.
| Shelf life | 1 year | Visual alarm | Sound and light vibration alarm |
| Instrument dimensions | 50*97*30.5mm | Display | Liquid crystal display |
| Operating temperature | -10-50 C | Detection technique | Instantaneous alarm |
| Operating humidity | 15%-95% RH (non condensation) | Battery | 3AAA/7 alkaline batteries |
We offer a wide range of robust, high performance portable and fixed gas detection solutions designed to meet the specific needs of marine applications; whether at sea or at port.
